Copying/Pasting User Code Information
|Top Previous Next|
Program > User Codes
Note: Profiles must be the same in both panels and both partitions to accurately copy and paste user code information.
In the User Codes window, select the user to be copied from the list on the left-hand side. Click the Copy button. Click the Paste button. This will automatically paste the user into the panel, allowing you to then change the Partition number.
Note: To copy a user to a different panel, the two panel models must be the same. For example, to copy a user from an XR40 Command Processor™ Panel, the second panel must be an XR40.
In the User Codes window, select the user to be copied from the list on the left-hand side. Click the Copy button.
Select File > Close Panel to close that panel. Then select File > Panel Information and open the panel to which you will copy the user code information.
Select Program > User Codes and click the Paste button. This will paste all of the user code information you copied from the first panel into the second panel.