Program > Output Schedules
Output Schedules allow you to set the times when relay outputs connected to your system turn on and off automatically.
Output: Enter the output number that you wish to assign a schedule.
To program door schedules, enter D and a device address number.
XR500 Series or XR2500F - select D01 to D16
XR100 Series - select D01 to D8
Note: Door schedules are available on the XR500 Series, XR2500F, XR100 Series. All other panels program output schedules using output numbers only.
Schedule: Enter the schedule number that you want to program. The Schedule field allows you to set up to 100 different scheduled times for relay outputs and door access relays connected to your system to turn on and off automatically. The maximum number of schedules you may assign per door access relay or relay output is 8.
On: Enter the time that you want to turn on the output. Repeat for each day of the week that you wish to program.
Off: Enter the time that you want to turn off the output. Repeat for each day of the week that you wish to program.
Note: XR500 Series panel and XR200-485 Enhanced only. You may enter the opening and closing times for three holidays (A, B, and C) as designated in Program > Holiday Dates. Holiday programming supercedes all other schedule programming.