TMSentry™
This new control panel represents the next generation of teller machine security. The compact size of the TMSentry easily accommodates new, slimmer ATMs and ITMs, or serves as a space-saving upgrade to existing teller machines. Built-in encryption and six supervised zones provide your financial customers with the highest level of protection in the most compact size available on the market.
Six fully supervised alarm zones on-board allow for the addition of security devices such as seismic detectors, door contacts and heat detectors. Expandable up to 10 zones with keypad.
- Banking
- ATM security
TMSENTRY ATM Panel
TMSENTRY-KIT ATM Panel with Thinline Keypad and Deskstand
Product Resources
Specs & Guides
Version 252 | March 10, 2025
Time Change
This update allows the panel to receive time updates from SecureCom Wireless® Servers. This option can be enabled in panel programming on the keypad or on Dealer Admin. To receive time updates from SecureCom Wireless Servers, complete the following steps:
- At the keypad, enter 6653 (PROG) and select CMD to enter the programming menu.
- In SYSTEM OPTIONS, go to REQUEST TIME CHG and select one of the following options:
- NO — Do not request time update
- SCS — Request time update from the monitoring center receiver
- SCW — Request time update from SecureCom Wireless
- In DST, select YES to observe daylight saving time. This option is only available if you selected SCW.
Zone Location
This update allows you to assign zones an optional secondary name to give further clarification on the location of a zone. Zone Location provides the monitoring center additional support and promotes quicker response times from monitoring center operators and first responders. The secondary name is only visible to the monitoring center and does not display on the keypad.
This option can be enabled in panel programming on the keypad or on Dealer Admin. To add a Zone Location to a zone, complete the following steps:
- At the keypad, enter 6653 (PROG) and select CMD to enter the programming menu.
- In Zone Information, enter the Zone Number and Zone Name, then proceed to the next prompt.
- The Zone Location prompt appears after Zone Name. Press any select key or area and then enter up to 16 characters for the zone location. This prompt can also remain blank, and the zone name is sent to the Monitoring Center instead.
- Press CMD to continue.
Sempro Communication
Previously, systems without a programmed communication path could not send messages to SecureCom Wireless servers. Now, systems communicating with Dealer Admin send messages regardless if they have a communication path programmed, allowing for push notifications and analytics in Dealer Admin and Virtual Keypad.
Obtaining the Firmware
TMSentry™ firmware updates are available, free of charge, on Dealer Admin.