XR550 International Control Panel
The XR550INT control panel combines intrusion, access control and video in one panel. It can be configured for users to gain access and disarm the area with a single card read.
- Small to large business
- Banks
- Commercial
- Enterprise level solution
- Large scale customizable management
- EN 50130-4 - EMC Product Family Standard: Immunity requirements for components of fire, intruder, and social alarm systems
- EN 50130-5 - Environmental Standards
- EN 50131-1:2006+A1 - Intrusion and Hold-Up Systems
- EN 50131-3:2009 - Control and Indicating Equipment
- EN 50131-5 - Interconnections Equipment Using Radio Frequency Techniques
- EN 50131-6:2008 - Power Supplies
- EN 50136-1 - Alarm Transmission Systems and Equipment
- EN 50136-2:2013 - Supervised Premises Transceiver
- EN 50136-3 - Receiving Centre Transceiver
- EN 50131-6 - Power Supplies
- EN 61000-3-2 - Limits: Limits for harmonic current emissions (equipment input current less than and equal to 16 A per phase) includes A1 & A2 July 1, 2009
- EN 61000-3-3 - Limits: Limitation of voltage fluctuations and flicker in public low-voltage supply systems for equipment with rated current less than or equal to 16 A per phase and not subject to conditional connection
- EN 61000-6-4 - Generic Standards: Emission standard for industrial environments
Export Control
The XR550INT with encryption uses AES encryption and any export beyond the United States must be in accordance with Export Administration Regulations.
Product Resources
Version 755 | August 5, 2026
Wireless Zone Missing Status
Previously, a wireless zone needed to return to a Normal state before a Sensor Reset could be performed to clear its Missing status. This could make troubleshooting wireless issues difficult when a door or window remained open after the wireless zone was no longer missing.
Now, after communication with the wireless zone is restored, an authorized user can perform a Sensor Reset to clear the Missing status, regardless of the zone’s current state.
Deleted Zone Status
Previously, deleting a zone did not clear all existing status information associated with the zone, which could cause the deleted zone to remain in the Zone Status list and prevent its status from being cleared.
Now, deleting a zone clears any existing status information associated with that zone.
Wireless Zone Status Display
Previously, when a wireless zone had Disarmed Open in Zone Information set to None, checking the Zone Number in Zone Information could display an incorrect zone state. The correct zone state was displayed in other menus, including Zone Status in the User Menu and the Diagnostics menu. Now, Zone Number displays the correct state for wireless zones when Disarmed Open is set to None.