SCS-150 Main Processor Card
Used in the DMP SCS-1R Network Enabled Receivers, the SCS-150 provides a battery-backed 5000 event buffer, and the fast transmission speeds and high data integrity of the Serial 3 communications format. Install up to five line cards in the available slots, with complete flexibility to use either dialer or network cards in each slot.
For use with: SCS-1R Security Control Receiver
- Monitoring center
California State Fire Marshall (CSFM)
New York City Fire Department (FDNY)
NIST AES Algorithm Certification
- #1760 128-bit
- #2599 256-bit
Underwriters Laboratories Listings
- ANSI/UL 365 - Police Station Connected Burglar Alarm Units and Systems
- ANSI/UL 864 - Control Units for Fire Protective Signaling Systems
- ANSI/UL 1076 - Proprietary Burglar Alarm Systems and Units
- ANSI/UL 1610 - Central Station Burglar Alarm Units
- ANSI/UL 1635 - Digital Alarm Communicator System Units
Underwriters Laboratory of Canada Listings
- ULC-S304 - Standard for Central and Monitoring Station Burglar Alarm Units
- ULC-S545 - Standard for Residential Fire Warning System Control Units
- ULC-S559-04 - Equipment for Fire Signal Receiving Centers and Systems
- ULC-C1023 - Household Burglar Alarm System Units
- ULC/ORD-C1076 - Standard for Proprietary Burglar Alarm Units and Systems
See Compliance Note (LT-2513).
Product Resources
Version 108 | December 9, 2026
Previously, when the Print Operation was set to ALWAYS in the SCS-150 programming options, the receiver would not start up unless the dip switches were set to 1111, which clears all receiver events. Now, the SCS-150 correctly starts up when the Print Operation is set to ALWAYS.
For more information about updating the SCS-150, refer to the SCS-150 Update Installation Sheet.
Obtaining the New Software
To download and update the SCS-150, a SD (Secure Digital) card formatted for FAT32 is required.
To load the software onto the SD Card, complete the following steps:
- Click on software link to download.
- Select Save in the popup window. Save the Zip file to your computer.
- Extract the Zip file onto the SD Card. There should be two files extracted:
- SCS150a.bin
- SCS150b.bin
Note: These two files need to be placed on the root directory of the SD card, not inside a folder.