International 5-Inch Touchscreen Keypad

Triple EOL Support

Version 708 supports a modification to the current zone EOL programming option in Zone Programming for the built-in keypad zone expansion. Available EOL programming options have been updated to Single, Dual, and Triple.

Clean Option

The Clean Keypad Screen option locks the screen for 40 seconds so you can clean it without accidentally pressing buttons.

Clean a Touchscreen Keypad
Use gentle pressure to clean the display, screen, keys, and housing. Use only alcohol sprays or wipes that contain 70% isopropyl alcohol to clean keypad surfaces.

Avoid spraying cleaner directly onto the keypad, oversaturating cleaning cloths, or allowing cleaner to make contact with internal electronic components, cables, or power sources.

1. In the Carousel Menu, tap Options.
2. Tap Clean Keypad Screen.
3. Use an alcohol wipe or spray a small amount of rubbing alcohol onto a clean, dry microfiber cloth to gently wipe down all keypad touch surfaces, removing any excess cleaner.
4. Wait 10 seconds, then completely dry all keypad surfaces.
5. If necessary, use a clean, dry microfiber cloth to gently remove streaking

After the countdown timer expires, the keypad returns to normal operation. To exit the countdown early, press and hold the Shield icon for 2 seconds.

Programming Support Improvements (7800INT)

Wired graphic keypads can now be used to program 734INT Series Access Control Modules and 503INT Power Supplies. This enables installers to use a 7800INT Series graphic keypad to program these devices locally.

Initial Power Up Improvements (9800INT)

When a 9800INT Series Wireless Touchscreen Keypad is powered on for the first time, the boot screen is displayed, then the home screen is displayed for approximately 15 seconds before transitioning automatically to the pairing screen. You can exit the pairing screen by tapping the Shield icon.

General Display Improvements

Occasionally, graphic touchscreen keypads may have displayed a white screen during processing which required the user to cycle power to the keypad. Version 705 (2/18/21) fixes this issue.

Automatically Prompt User for New Wi-Fi Password

When the user changes their Wi-Fi password, they automatically receive an Incorrect Wi-Fi Password message on their keypad. The user presses ENTER PASSWORD and is redirected to a programming prompt. When the user enters their new Wi-Fi password and presses CMD, the password is updated in NETWORK OPTIONS programming and communication with the central station is reestablished.

Touchless Arming

Present a credential to the built-in reader to automatically arm the system without touching the keypad. After the arming delay expires, All/Perimeter systems arm All. Home/Sleep/Away and Home/Away systems arm Away.

Prox Arming/Disarming Transition Speedup

In previous firmware versions, arming a system then disarming it with the built-in prox reader during the arming sequence resulted in a slow transition from the EXIT TIMER screen to ALL SYSTEM OFF. Version 705 speeds up this transition significantly.

User Interface Improvements

Version 705 includes changes to the keypad user interface to improve the readability of text.